I lost my plunger and ordered another one. Now I am not sure of the correct way to assemble the spring and plunger. Something about pushing the plunger/spring in position I'm not sure of. Thanks.
Ok I still can't post pictures, but if you go to Midwest Gun Works and pull up the part diagram you can see how it supposed to be. If you have any more questions just let me know. I can try to post a picture another way to help you out. Hope this helps a little.
ok go to Midwest website. Center of page there are drop down menu boxes, says parts finder. Check browning and then SA22 click go. There should be a parts diagram come up with numbers on it. #8 should be the plunger.
Okay I have that. It is the same diagram as my manual has. Does the plunger go under the spring or on top of it?
One more question. Does the spring go on first then the plunger through it? Or the plunger go on first with the spring thru it? Thanks.
Not sure what you are referring to, but without some pictures of what you're taking about its really hard to figure out where you're at. Did you watch the video a couple times?