Friction rings, etc.

Discussion in 'Browning Auto A-5' started by Michael Milligan, Mar 24, 2020.

  1. Michael Milligan

    Michael Milligan Copper BB

    I know the springs are different between a magnum and a light 12, but aren't the friction pieces and rings essentially the same?
  2. Rudolph31

    Rudolph31 .30-06

    Ranger6 likes this.
  3. Ranger6

    Ranger6 .270 WIN

    You can set the mag up like a light 12 to shoot target loads. Start on heavy setting. If you go to Midwest gun works you can see the difference. Make sure if your gonna shoot 3 inch shells you set it up with the magnum set up.
  4. Michael Milligan

    Michael Milligan Copper BB

    Midwest only has the friction ring. Anyone know of a source for the other parts? I do not need the springs at all as I replaced them about 4 years ago.
  5. Rudolph31

    Rudolph31 .30-06

  6. Ranger6

    Ranger6 .270 WIN

    If not call art. He has a good supply usually.
  7. Michael Milligan

    Michael Milligan Copper BB

    Art ? ? Who is that please. Also, thanks everyone. I appreciate the help.
  8. Ranger6

    Ranger6 .270 WIN

    636-944-3630. Gunsmith god of the auto 5. Most likely when you call this number you will get brad. That’s one of arts boys. Real nice people.
    Rudolph31 likes this.
  9. Rudolph31

    Rudolph31 .30-06

  10. Michael Milligan

    Michael Milligan Copper BB

    Thanks for the help folks. Ordered what I needed from Midwest.
    Rudolph31 likes this.

Share This Page