Whilst cleaning a Browning B725 Black Edition (2014 modle), the trigger was pulled. This appears to have locked some mechanism so the gun cannot be rebuilt after this cleaning process. Is there a solution to this problem? Thanks & Regards
Sorry for the REALLY late reply. No doubt you have gotten this resolved in the 3 short years that have passed. ;-) But for those who have similar issues, it's a simple fix. All you need to do is look into the receiver and you will see a small tab. Push this down (you will hear a click ). If it does not click, your trigger has tripped it. Open the lever/latch by pushing it to the right side (just as if you were opening it). This will reset the receiver. Then you can reassemble your firearm.