still available alot of tire kickers but no takers
The funny thing on the dump shoot was my friend was a taxidermist and he was approached by a Motocyle gang to see if he would tan rat skins, they...
when I was younger I would tape one of those double D plastic flash lites with the magnetic on/off switches to the barrel and go shoot rats at the...
Browning CITORI Lightning 12 I have a Browning Citori Lightning 12 Gauge 3” 26” Invector Plus choke system, made in 1993 (NX) This gun was bought...
When I was alot younger I would tape a flash lite to the barrel and shoot rats at a local dump, had to put alot of tape and it worked fine
I own several BARs I as a rule I crimp all of my rounds that could be used in a hunting situation. I do this to insure that no failure to go into...
If I recall it was a custom made, I would say a little to much for the rotary action. Many years ago a friend of a friend had a 300WM shear the...
I have a late 60's Bar in 06, really no difference than my newer BARs of different caliber all steel barrels threaded to receivers and all made in...
Another point of interest inspect your cases, I owned a 742 semi auto 30-06 which ripped the rim off under the extractor I can only suspect a dirty...
I have owned as many as * of these, I am down to 4, a great gun
Life member NRA and Illinois Rife Association Navy
I personally use 150 to 200 gran, I tried those little 110 and they cannot get a good grip with the rifling causing brass shear unless you drop the...
I have several BARs from 243 to 338, if they jam in my situation is a dirty chamber follow by dirty cases keep them shiny, check the gas port to see...
Grade 2, friend has exact in 308 mine is std
looks to be a grade 2
to my knowledge the early BAR was made in 243, 25-06, 270,308, 30-06, 7mm, 280, 300wm and 338wm
[ATTACH] [ATTACH]
It is a 9.3x74r 20 gauge , It has the s/n 224PYXXXXX, I have a couple Browning books but neither show the 224, one states it would be a Superposed...
My belief is the REAL A5 was discontinued for two reasons, One not for lack of buyers but COST to Manufacture, I have a Benelli sbe, it is not built...
I did a little more research and the difference between the two is where the shoulder of the cartridge case contacts the wall of the mag, there is a...
Separate names with a comma.
