So I found a guy with two stocks for sale. Pretty sure I am going to buy both of them. He also has a forearm but he is unsure if it is for a 16 or 20 gauge. He said the barrel channel looks big on his 20 gauge. Will a 20 gauge forearm fit on a 16? I plan on taking measurements of a 16 gauge forearm and having him measure his to compare. Hopefully you guys have some info for me
Short answer.... no The sixteen forearm will fit a 20. Well it will go over the magazine tube, the 20 will not go over magazine tube and spring.
I’m sure it could be done, but will cost more then it’s worth. Both are available. You can have a stock and forearm custom made. Art has a very good wood guy that will duplicate anything. Browning used special tools to make these, not likely just anybody will have them.
I have a horizontal boring machine at my disposal that I think it would be fairly easy to do if I knew for sure it would fit.
The other thing about doing that is when you start cutting the inside out to make it bigger, you also loose material thickness. Sure would suck to spend money doing all that or time, and have it crack on the first shot.
probably only one way to find out. Do and see if it works. I have a 1909 16 gauge and it had the wrong forearm on it. It was a nightmare getting the correct one. It don’t match, but it will be getting new stock and forearm made by art eventually
Short answer.... no Now with that being said, I was told I could not make my 1936 with one piece lifter function correctly with a two piece lifter that provides speed load. Well it works flawlessly, but it cost a bunch of money and time. No one knew or wanted to help, lot of liability I guess. So if you venture down this road be prepared for several things. You will most likely be on your own. If it don’t work, you will have a 20 gauge forearm that is useless. Then you will end up having one made or buy one that don’t match, or wait until you find one. Remember once you change one thing it effects other things. Can get out of hand really quickly.